yobob 0 Posted September 14, 2009 Author Report Share Posted September 14, 2009 mais comment on fait pour relire plusieurs fois la clé pour voir si c'est la bonne, et comment elle peut ne pas etre bonne?? je sais, beaucoup de questions... mais vous savez payer une 360 de sa poche et la bousiller de sa propre main, je crois qu'on s'en veut longtemps Quote Link to post Share on other sites
yobob 0 Posted September 14, 2009 Author Report Share Posted September 14, 2009 bon, j'ai regardé sur le site de mon fournisseur et j,ai trouvé la description d'emplois en anglais: This is a must have for your Liteon (Lite-on) DVD drive. This tool helps you to extract the DVD key without soldering. Only 2 wires are needed. If you need to read the key, attach the alligator clip on the power regulator on the DVD adapter and then hold the pin on TX. If you don't need to read the key, unattach the alligator clip from the dvd adapter and you can keep this key extractor adapter in a safe place for future use. This is TIAO's Xbox 360 Connectivity Kit V3 (aka TIAO's solderless lite-on DVD key extractor). This kit is designed to easy extract lite-on DVD key without soldering (only one probe) . This tool combines a Connectivity Kit 2 plus a RS232 to TTL converter (powered by MAX3232). You can extract Lite-on / BENQ DVD key in minutes. No soldering required. All you need to do is to connect the dvd adapter to the molex connector (from your pc) and reuse xbox 360 dvd power cable to connect the dvd adapter to your dvd rom, connect the sata cable from the dvd rom to your sata port. Attach the alligator clip to the dvd adapter as shown in the picture. Then hold one probe on TX via (see pic) while programming. You only need to hold on probe, that's it! so you other hand can click mouse! You need DVDKey or DVDkey32 to extract the key. You can also use Xtractor Reader to extract the key. So you want to make backup copies of your saved Xbox 360 games or simply feel like prodding the contents of the hard drive? Instead of disassembling the drive unit, you can now purchase the 360SATA, an adapter that simply plugs into the bottom of the drive, and via an internal SATA cable to one of your computer’s SATA ports. This Xbox 360 hard drive connector combines a SATA connector and a Mini USB connector into one plug. The Mini USB connector provides the power to the Xbox 360 HDD. The hard drive inside Xbox 360 uses standard connectors, but this adapter will keep you from opening the case, voiding your warranty. It will also be much quicker to use daily. You can use Xplorer360 to get full read/write access to the drive. You can use SATA cable (included) and a USB cable from you digital camera or disk drive power (not included) to make the connections. XBOX 360 DVD Drive Power Adapter V2 for the PC. It converts the XBOX 360 DVD Power input plug to a standard PC Molex Power plug. This is the version 2 of the adapter. The version 2 features the following improvements: * Improved PCB design and layout* Added support for debug mode (on some DVD-ROMs)* Added two LEDs to indicate the status of "Eject" button* Added two LEDs to indicate the status of "Debug" button* Added power on/off switch* Included a DVD power cable* Using a higher VA rating low dropout postive regulator to convert 5V DC to 3.3V DC* Using MAX3232 for RS232/TTL signal converter* Works with any COM port including USB to serial adapter* Solderless - extract key in minutes You also need a PCI to SATA controller card and XBOX 360 case opening tool in order to flash the DVD drive. This board has an eject switch for the driver and 2 LED indicators to tell you the board is functioning. This board also has an Debug switch for drivers supporting debug mode. This board also has a power on/off switch. This product is perfect if you plan on hooking up your dvd to your pc and do some interesting testing. No COM port? Not a problem, select options below to add a USB to serial adapter in your order. Warnings In order to connect the Xbox 360 DVD to your PC, you have to open Xbox 360 DVD case, which invalidates your warranty. If you want to keep you warranry, do not try this. alors apres cette lecture je conclu ceci, rectiffiez moi si je suis dans l'erreure s.v.p. :alors je connecte l'adaptateur au pc par le cable a 4 fils et le connecte aussi au lecteur par le cable a 12 fils, ensuite je connecte l'adaptateur rs232 au pc, je clip la pince rouge je sais pas ou( je crois sur la pin non soudé de la grosse puce noir, je pique l'aiguille dans le lecteur dans le petit trou en haut du premier spot de pont et en gardant tout en place, tout devrais être beau(bien sur ouvrir a moitié le tray) pour passer a dvd key c'est ça?? Quote Link to post Share on other sites
tgv26 44 Posted September 14, 2009 Report Share Posted September 14, 2009 Tu as la 360, tu as acheté du matos, dans une boutique, pas très sérieuse, alors il faut que tu te mettes au boulot, mais je pense qu'il faut mieux contacter un vrai poseur.Car là, ne pas comprendre qu'il faut réitèrer la lecture afin d'être sur de la création des fichiers "key seem good", ne pas savoir à quoi sert ce que tu as du payer cher....t'es mal parti.On ne peut testé tous les gadgets....enfin presque!Tous est marqué, il te suffit d'adapter tes alim. mais du peux aussi le faire à l'ancienne, souder les points de ton rs comme sur le tuto du spoof du liteon.D'ailleurs, il te permettras peut-etre de mieux saisir ce que tu dois faire.Je te laisses fouiller un peu.Prends gardes @ tes manip.@+ Quote Link to post Share on other sites
nino-xbox 44 Posted September 15, 2009 Report Share Posted September 15, 2009 mais comment on fait pour relire plusieurs fois la clé pour voir si c'est la bonne,et comment elle peut ne pas etre bonne??pour relire plusieurs fois il suffit de faire la manip plusieurs fois si la première fois ya 11 22 33 44 55 66 77 88 99 11 222 33 44 55 66 77 et la seconde fois 77 66 55 44 33 22 11 99 88 77 66 55 44 33 22 11 et la troisième fois 77 66 55 44 33 22 11 99 88 77 66 55 44 33 22 11 bein on s'appercois que la première fois la clé est pas bonne les 2 fois suivante elle le sont car la clé est identique c'est une sécuritée à prendre, car certains aurais déja eu de mauvais dump ++ Quote Link to post Share on other sites
yobob 0 Posted September 15, 2009 Author Report Share Posted September 15, 2009 (edited) Bon, alors j'ai finalement trouvé comment extraire ma clé dvd avec le matériel que j'ai Pour tout ceux qui on acheté du mato provenant "www.daube.com" comme moi peuvent avoir un tuto claire ici pour extraire la clé : matosde tarlouze.net bon je commence mon flash et merci beaucoup à tout ceux qui ont pris le temps de répondre à mes questions de débutants Prenez bien le temps de vous informer sur ce que vous faites car j'ai pu voir que c'est très facile de bousiller sa console...Prenez votre temps merci encore à nino pour son tuto Edited September 16, 2009 by tgv26 Pas de lien non partenaire Quote Link to post Share on other sites
tgv26 44 Posted September 16, 2009 Report Share Posted September 16, 2009 Merci de respecter le réglement.Bon courage avec ton matos.Et soit prudent. Quote Link to post Share on other sites
yobob 0 Posted September 18, 2009 Author Report Share Posted September 18, 2009 (edited) bon, je vois pas pourquoi tu bloque le tuto que j'ai trouvé... juste avec ça j'ai trouvé la réponse à toutes mes questions et j'ai flashé ma 360 correctement et il est mieux que celui de nino tant qu'a moi... PAS DE LIEN NON PARTENAIRE pour les intéressés Edited September 18, 2009 by nino-xbox pas de liens non partenaire merci Quote Link to post Share on other sites
yobob 0 Posted September 18, 2009 Author Report Share Posted September 18, 2009 (edited) J'AI FINALEMENT FLASHÉ MON LECTEUR LITE ON AVEC SUCCÈS ET TESTÉ AVEC FABLE2!!!!MERCI À TOUS CEUX QUI ONT PRIS LE TEMPS DE RÉPONDRE, MERCI À XAVBOX.COM , TRÈS BON SITE, BEAUCOUP D'AIDE P.S: désolé pour le lien du détaillant, mais pour le lien du tuto je te conseillerais de le laisser car sérieusement c'est le meilleur que j'ai vu, très claire, beaucoup de photos et il a répondu à toutes mes question et je l'ai suivit presque intégralement si tu change d'avis. PAS DE LIEN NON PARTENAIRE ( lit le réglement ou essaye de le comprendre ) Et finalement pour les curieux, je ne saurais vous conseiller le ck3 pour flasher facile à trouver: www.arcalide.com ça va vous éviter bien des misères, surtout pour les débutants, croyez moi Edited September 18, 2009 by nino-xbox pas de lien non partenaire, sa fait 3 fois la 4ème tu prend un ban ++ Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.