geek 20 Posted March 24, 2014 Report Share Posted March 24, 2014 Bonjour Hier matin, quand j'ai allumé ma 3ds, une led ( que je ne savais meme pas qu'il y en avait une ) s'est allumé? A quoi sert cette led et pourquoi s'est elle allumé? Merci de vos réponses Quote Link to post Share on other sites
cyriltuchaa 4 Posted March 24, 2014 Report Share Posted March 24, 2014 une led sur quoi? Quote Link to post Share on other sites
geek 20 Posted March 24, 2014 Author Report Share Posted March 24, 2014 sur le linker gateway rouge c'est le petit trou a coté de la micro sd Quote Link to post Share on other sites
cyriltuchaa 4 Posted March 24, 2014 Report Share Posted March 24, 2014 il t envoie la 2.0 lol.je ne savais pas non plus qu il y avais une led 1 Quote Link to post Share on other sites
fet95 16 Posted March 24, 2014 Report Share Posted March 24, 2014 Oui une fois, lorsqu'il était HS il s'était allumé en bleu.... Quote Link to post Share on other sites
geek 20 Posted March 24, 2014 Author Report Share Posted March 24, 2014 (edited) moi il s'est allumé en rouge Edited March 24, 2014 by geek Quote Link to post Share on other sites
gicl 60 Posted March 24, 2014 Report Share Posted March 24, 2014 Ce led sert pour le test de diagnostique il peut allumer de différente couleur tout dépend de l'état du test. Si vous avez la version beta 2.0b dans votre machine il n'est pas recommander de faire ce test avec cette version car vous pourriez bricker votre 3DS, ce test vous pouvez le faire avec les autres version mais pas la version beta. Quote Link to post Share on other sites
gicl 60 Posted March 24, 2014 Report Share Posted March 24, 2014 Hardware Diagnostics sequence and LED colour meaning:Test 1. FPGA REDTest 2. SPI write test YELLOWTest 3. SPI read test TEALTest 4: SD (see below)BLUE = No Valid SD DataWHITE = FAT32 partition detectedGREEN = 3DS ROM header found (if you are still experiencing problems please download and write our GW_testrom to your micro SD, for a full read test)When GW_testrom is detected on the Micro SD, LED will flash hue from BLUE to RED depending on the detected read speed, at the end of a full 1G successful read of the test file the LED should turn to constant GREEN.If any test fails the diagnostics will halt on that test. (So if you start diagnostics and only see a constant RED, this means the FPGA is faulty and you should contact your reseller for a replacement. Constant RED, YELLOW or TEAL is idicative of a non user repairable fault) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.