Help Me Please D2b And Wiikey 2

[xpulse 0]

Hello

Please can you help me too

My problem i can read only on english, which contact i need soldered for D2B chip, if i use wiikey 2

 

+3.3

GRND

A

B

C

 

G

 

D

E

F

 

I take this letters from instruction 1.2 on wiikey.cn/resources/

Thank you for yours help.

[Cuty59 0]

Hello,

If you have a D2B chipset, you only need to solder the +3.3, GRND, A , B and C point.

 

the G point, it's just if you have a D2C/D2C-2/D2E chipset.

 

but take care, if your wiikey2 modchip has a white stiker behind, you must solder the D, E and F point.

 

good luck

[xpulse 0]

Hello,

If you have a D2B chipset, you only need to solder the +3.3, GRND, A , B and C point.

 

the G point, it's just if you have a D2C/D2C-2/D2E chipset.

 

but take care, if your wiikey2 modchip has a white stiker behind, you must solder the D, E and F point.

 

good luck

 

Yes my Wiikey 2 is white color, so I don't need solder A B C.

What's right.

Sorry by I noob in Wii, completly )

[Thierry74 0]

Hi,

For your drive you must connect the GND, +3.3V and A, B, C that's all

 

++

[xam1311 0]

lut

ça va être dur si même l'anglais qu'il est censé comprendre , il comprend de travers

repeat after me for you

ONLY GNd / 3V3 AND A ,B and C

++

[Cuty59 0]

il a dit que le sticker sous sa wiikey 2 est blanc, il doit donc aussi souder D E et F non ?

[crazydriv3r 0]

Hi,

If you have a D2B Chipset, you need to solder the point GND, 3V3, A, B and C.

Other points arent necessary for this chip', so don't solder them

 

Don't forget to give us some news

 

Bye

 

EDIT: The sticker's color doesn't mater because you have a D2B chipset