Deynet 0 Posted October 10, 2009 Report Share Posted October 10, 2009 Hi, I have a bricked Wii and a full NAND backup from bootmii. But bootmii not installed as boot2. I soldered Infectus2 on the Wii NAND and tried to program it with last Xavbox/Bonx Infectus Programer 1.0.0.7. It identify Samsung Flash, so I think installation is ok. Writing works from block 0 to 4095. But if I compare written data with my NAND Backup, most blocs are different. If I choose "All and compare" or "Update and compare" and click write, it stops by bloc 0, I think comparing fails. Why compare data doesn't work??? What's wrong??? Quote Link to post Share on other sites
MaitreKanter 182 Posted October 10, 2009 Report Share Posted October 10, 2009 Hi, try to extend your "we" wire...if it doesn't work not yet, you have to unsolder samsung chip and retry to program it. Quote Link to post Share on other sites
Deynet 0 Posted October 11, 2009 Author Report Share Posted October 11, 2009 (edited) Hi, try to extend your "we" wire...if it doesn't work not yet, you have to unsolder samsung chip and retry to program it. Which wire is "WE"? On the Diagram no "WE" point exist? I used the Infectus Wii Nand diagram Edited October 11, 2009 by MaitreKanter very big photo !!!! Quote Link to post Share on other sites
MaitreKanter 182 Posted October 11, 2009 Report Share Posted October 11, 2009 WE = Q on the infectus diagram.. Quote Link to post Share on other sites
Deynet 0 Posted November 2, 2009 Author Report Share Posted November 2, 2009 WE = Q on the infectus diagram.. Doesn't work better. Any other idea? Quote Link to post Share on other sites
xavbox 0 Posted November 2, 2009 Report Share Posted November 2, 2009 Hello Bonx, come to expline your fucking soft !!! Quote Link to post Share on other sites
Plastik 0 Posted December 17, 2009 Report Share Posted December 17, 2009 Hi all!I have the same problem.The infectus V2 is correctly installed I followed bonx's instructions.I can read the NAND but when I try to flash anything it says to me:Bloc1 different.Update bloc1 failed. Please tell me what's the problemThank you. Quote Link to post Share on other sites
thiefstar 0 Posted December 22, 2009 Report Share Posted December 22, 2009 Hi allI have the same problem.and my nand chip is Samsung Flash I dupmed the block 4090~4095. and choose the "compara data " it's works fine. next, I "Erase" the block 4090~4095 Finally, I choose "All and Compara" and "Write"I got fail Please tell We what's the problem? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.